ページを印刷する>>T shape range hood:
3.1The cooker hood should be placed at a distance of 65-75cm(26-
30inch)from the cooking surface for the best effect.See the Pic 1.
Install the hook on a suitable place once the installation height
3.2
is fixed,and keep it in line.The fixed position of the inside chimney
bracket is the place of chimney.
Fix the outside chimney bracket on the outside chimney,and be
3.3
sure that the inside chimney can be adjusted the height in in freely
as well as fixing the extensible pipe.After wards
extensible pipe and chimney on the cooker hood. See Pic 3.
Put the cooker hood on the hook.See Pic 4.
3.4
Adjust the height of the inside chimney to the position of the inside chimney bracket and fix on it by
screw,after adjusting the position,fix the body with safety screw^See Pic 5. Note:The two safety vents are
positioned on the back casing,with diameter of 6mm.
- --- Warning: Failure to install the screws or fixing device in accordance with
these instructions may result in electrical hazards.
install the