- ページ 12
配管製品 Bristan Descent DSC BAS CのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bristan Descent DSC BAS C 16 ページ。 Tap
Bristan Descent DSC BAS C にも： インストール手順とユーザーマニュアル (16 ページ)
ページを印刷する
Maintenance
General Cleaning
Your product has a high quality finish and
should be treated with care to preserve the
visible surfaces. All surfaces will wear if not
cleaned correctly, the only safe way to clean
your mixer is to wipe with a soft damp cloth.
Stains can be removed using washing up
liquid. All bath cleaning powders and liquids
will damage the surface of your fitting, even
the non-scratch cleaners.
Note: Never use abrasive detergents or
disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Cleaning
Before carrying out any maintenance,
turn off the both water supplies or close
any isolating valves. Prise out the handle
cap, losen the grub screw using a 2.5mm
hexagonal key and remove the handle.
Cartridge
Unscrew the shroud and and cartridge
retaining nut and pull the cartridge out from
the body. Clean the cartridge thoroughly
under cold water to remove any build up of
limescale or debris. Replace the cartridge
into the body and tighten the retaining
nut and shroud. Push the handle onto the
cartridge and tighten the grub screw and
push fit the cap.
Valve
Remove the spline adaptor. Using a suitable
socket remove the valve. Wash the valve
with clean running water and make sure
that any debris has been removed. Lightly
grease the seal (only use silicone grease),
replace the valve, spline adaptor and
handle. Tighten the grub screw and push fit
the cap.
12
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Grub Screw
Handle
Grub
Screw
Handle
Important: Tighten the valve/ retaining
nut with the correct size spanner /
socket and apply appropriate force/
torque.
Do not overtighten.
Cap
2.5 mm
hexagonal key
Shroud
Retaining
Nut
Cartridge
Tap Body
2.5 mm
hexagonal key
Cap
Screw
Spline
Adaptor
Valve
Tap body