- ページ 14

MP3プレーヤー Majestic SDB 3219のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Majestic SDB 3219 16 ページ。

ON/OFF switch

microUSB port

10 Phone jack

11 Clip

Tracks insertion by computer

This player uses a microSD card.

When the unit is OFF insert a microSD card in the slot on the side of the unit, then connect the MP3

player to the USB port of your PC, by using supplied USB cable.

After windows have installed the player you will find it under computer as removable USB.

Copy your files from the computer into this MP3 player.

When transfer is complete you can disconnect the unit from PC and remove the USB cable.

Note: during computer connection the battery will be charged.

MUSIC

Push power switch to ON state, music playback will start automatically.

At the end of the last track playback will start again from the beginning. During track playback the blue

LED will blink.

During playback it is possible to press PLAY key to pause. When playback is pause press PLAY again

to start playback from the point it was stopped.

When the player is pause the blue LED will be on, the device paused will automatically switch to

standby mode after 60 seconds (to turn on again it is necessary to press PLAY for about 3 seconds)

After turn on if there is no microSD card inserted the blue LED will blink fast and it will turn off

automatically.

Stand by: when playing music, long press PLAY key for 3 seconds to enter standby mode. In standby

mode press PLAY key again for about 3 seconds to turn on the unit.

Songs changing: during playback press PRE/NEXT keys to switch to previous or next track.

Fast forward and rewind: long press PRE/NEXT keys during playback to rewind/fast forward inside the

track. During fast forward and rewind the blue LED will blink fast.

Volume adjustment: during playback press VOL+ key to increase the volume (when max level is

reached the player will emit a sound); press VOL- key to decrease the volume.

Battery charging

The player has a built-in rechargeable battery which can be charged by using USB cable connecting to

PC.

When the battery is empty the unit will emit a quick sound and red LED will blink.

To charge the unit turn on the PC and connect to it by using the supplied USB cable. The player should

charge completely in about 4 hours (the charging time depends on the battery charging status).

Jack 3.5mm to insert earphones.