- ページ 3
配管製品 Bristan IRBS1-CPのPDF インストール手順とユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bristan IRBS1-CP 20 ページ。 Infrared automatic basin spouts
ページを印刷する
Important Safety Information
• Please read these instructions
thoroughly and retain for future
use.
• All products manufactured
and supplied by Bristan are safe
provided they are installed, used
correctly and receive regular
maintenance in accordance with
these instructions.
• If you are in any doubt
about your ability to install this
product safely you must employ
the services of an experienced
qualified plumber/electrically
qualified person.
Warning: Do not
•
operate the product
if you suspect it is
frozen. Do not site
the product where it might be
subjected to freezing conditions.
• These fittings need to be
installed in accordance with, and
meet the requirements of the
Water Supply (Water Fittings)
Regulations 1999
and current byelaws.
• Remove all packaging and
check the contents for damage
before starting installation
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
• Before starting any installation
please consider the following: before
drilling into walls, check that there are
no hidden electrical wires, cables or
water supply pipes. This can be checked
with the aid of an electronic detector.
• If power tools are used do not
forget to:
- Wear eye protection
- Unplug equipment after use
• Fitting isolating valves to the
inlet feeds is required for ease of
maintenance.
•
Warning: Before installing
the new spout it is essential
that you thoroughly
flush through the pipework
in order to remove any remaining swarf,
solder, etc. Failure to carry out this
procedure could cause problems or
damage to the workings of the spout.
• This product must not be modified
in any way as this will invalidate the
guarantee.
3