- ページ 12

配管製品 Bristan K 1/2 CのPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bristan K 1/2 C 20 ページ。
Bristan K 1/2 C にも：取付説明書＆ユーザーマニュアル (5 ページ)

Installation cont

Bath Shower Mixer

1. Identify all components are present prior to starting installation using the diagram

overleaf.

2. Install the mixer body (6) to the bath.

3. Using washers (7) and the backnuts (8) secure the mixer body (6) to the bath by

tightening the backnuts (8) onto the threaded tails (a suitable spanner maybe needed to

fully tighten the backnuts (8).

4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).

5. Fit the shower hose (12) to the hose outlet, using the small washer and the handset (13)

to the hose using the small washer.

6. Turn on both water supplies and turn the handles to the open position, letting the water

flow for a few minutes to check all joints and connections for leaks.

7. To switch from bath to shower mode, turn the diverter lever (10), to revert back to bath

filling mode turn the diverter lever back.

Indice

Handle Screw

Handle

Shroud

Valve

Mixer Body

Washer

. . . .

10.

11.

12.

13.

Backnut

Diverter Mechanism

Diverter Lever

Cradle

Shower Hose

Handset