- ページ 3

楽器 Majestic concert marimbaのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Majestic concert marimba 8 ページ。

Frame Set Up & Resonator Attachment

琴架、琴框、共鳴管組裝

Connect curved braces to cross bar with hand knob. Do not tighten.

將圓弧形支撐架與方形連結桿以旋鈕結合，但請勿鎖緊。

Marimba & Xylophone

立奏低音 / 高音木琴

Identify low end leg assembly. With leg assemblies

lying ﬂat with the height adjustment crank handle on

the ﬂoor and the crossbar receivers facing up, the low

end leg will have the wheel with brake on the left.

For xylophone and marimba, insert one end of the

crossbar into receiver (A), and an end of the curved

brace into receiver (B). Tighten hand knob at position

(B) ﬁrst, then the other hand knobs at position (A) &

(C).

For vibraphone, insert one end of the crossbar

into receiver (B), and an end of the curved brace

into receiver (A). Pedal brackets should be on the

underside of the crossbar with the pedal facing toward

the player (wheel with brake) side of the instrument.

Pull rods should protrude on the top side of the pedal.

Tighten hand knobs at positions (A)&(C) ﬁrst, then the

hand knob at position (B).

將低音側琴架平放，再將連結桿組件插入琴架 (A) 位置，

圓弧形支撐架插入琴架 (B) 位置；先確保 (B) 處旋鈕可

鎖入圓弧形支撐架孔內，再將 (A) 處與 (C) 處旋鈕鎖緊

固定。

For Vibraphone, tighten hand knobs at position (A)

& (C) ﬁrst ; then hand knob at position (B).

室內型立奏顫音鋁琴則需先確保 (A) 處與 (C) 處

旋鈕可鎖入孔內，再將 (B) 處旋鈕鎖緊固定。

Vibraphone

立奏顫音鋁琴

Marimba &

Xylophone

室內型立奏低音 /

高音木琴

Vibraphone

室內型立奏顫音鋁琴