- ページ 2
楽器 Majestic M7550HのPDF 組立手順をオンラインで閲覧またはダウンロードできます。Majestic M7550H 2 ページ。 4.3 & 5.0 octaves deluxe / artist / professional marimba
ページを印刷する● Connect stabilizer bracket
For better resonator stability, you can find stabilizer
arms locate on the rail side.
Pull up the arms, swing over resonator top and insert
to corresponding rubber notch. Press down to
complete the assembly.
For 4.3 Oct Model
For 5.0 Oct Model
V. Other Adjustment
P11
● Instrument Height
You can elevate or lower the Instrument height by
tuning the hand crank handle located on each side of
instrument. Use imprinted scale guide for leveling.
To maintain balance of adjustment, atjust one
end at a time, do not exceed 2" increment at a time.
P7
IV. Place Toner bars
● Unroll the bars
Carefully unroll the tone bars on the flat floor, flip the
bars over so that the playing side faces up (arch side
faces down). Keep out the springs and sharp
object away from tone bar. Prevent scratch or
damages to bar surface.
Use soft wrapping to protect bars, do not scratch.
● Tone bar leveling
Due to the resonator weight, the rail might sag in the
middle after resonators are attached. This can be
corrected by extension screw length located inside
hinged center.
P8
● Position tone bars
Place the Natural note bars on top of the lower rails
(close to player side).
Position each tone bar in between bar posts, begin
from treble end, working progressively down towards
bass end.
Repeat above process with accidentals (refer to C
chromatic scale), placing tone bars over capped
resonators only. Open resonators should have no bar.
P12
VI. Finished View
M7550H
M6543D
P9
● Fasten Cord & spring
Once tone bars are in place, pull excess bar cord
through bass end, bring bar cord around end posts
and hook the springs together.
The springs has a small tension after they are
booked. You can adjust knot on the cord to get
different tensions after springs are connected.
P13
Memo
P10
P14