配管製品 Bristan Nero BNNRBSME8CのPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bristan Nero BNNRBSME8C 2 ページ。
ページを印刷するSpecifications
Cold Water Supply
Dynamic Water Pressure
Min: 0.2 bar
Max: 5.0 bar
3.0
3.0
2.0
2.0
1.0
4.0
1.0
4.0
5.0
5.0
0.
0.
Pressure
Pressure
BAR
BAR
Min: 5°C Max: 25°C
Maximum Static Pressure: 10.0 bar
Tools You'll Need
Pipe Cutter
Adjustable Spanner
Hexagonal Keys
Prior to Installation
All products manufactured and supplied by Bristan are safe to use
provided that they are installed, operated and receive regular
maintenance in accordance with these instructions.
This product needs to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999
and current by-laws. For full Installation Requirements & Notes (IRN)
please visit wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure
ease of future maintenance.
Before installing this product the water supply must be
thoroughly flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will
invalidate the guarantee.
Full access must be made available for future
maintenance/servicing purposes.
If in doubt, contact a registered plumber or your Local Water
Authority or the Secretary of the Institute of Plumbing,
address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
Installation Instructions
& User Guide
Please leave these instructions
with the end user
Product Code: NR BSM C (D4)
Inlet Water Temperature
Inlet Connections
Hot Water Supply
65°C
25°C
5°C
65°C Recommended
Spare Parts
To replace any spare parts
for your tap, why not
scan the QR Code or
visit www.bristan.com
and search for your product.
Pack Contents
x1
x1
x1
x2
Installation
1
3/4" BSP
Fit the taps to the bath, ensuring
the plinth is in place.
4
5
x2
x1
(Bracket
may look
different
to image
shown)
(Bracket may look different
2
Secure the taps to the basin by
using the washer and metal
backnut below the basin.
3
Hot
Connect the hot and cold water
supplies to the threaded tails.
6
Connect
the hose
and
handset
to the bath
filler.
Screw the wall bracket
to the desired position,
ensuring the hose
and handset can reach.
to image above)
Cold
Turn on the water supply.