ページを印刷するASSEMBLING YOUR VACUUM CLEANER
Always remove the plug from the power socket before fitting or removing accessories.
1.Fitting the vacuum cleaner
Before you use the vacuum, you must
install the brush into the body first.
2. Extending the rod
Extending the rod will make it easier for you to
reach and clean the floor. Either connect it to the floor
brush or to the multi brush (2-in-1) for vacuuming
furniture, shelves, etc.
3.Remove and install the dust cup
(a) Remove dust cup from body: push
the release button of dust cup then
take out the dust cup from body. (fig.
A)
(b) Install dust cup on body: first,
connect the underside of dust cup to
the body. (pay attention to the fitting
position and direction). Then push
the dust cup all the way to the body
(fig.B).
1 、 push here
2 、 move
fig.A
fig.B