- ページ 5

洗濯機 Majestic Appliances MJ-9000VのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Majestic Appliances MJ-9000V 18 ページ。 Majestic appliances owners manual front-load washer mj-9000v, mj-9000vg
Majestic Appliances MJ-9000V にも：インストレーション・マニュアル (6 ページ), オーナーズマニュアル (20 ページ)

ページを印刷する

Installing/Removing

Getting things ready to install

your appliance

Unpacking, Inspecting, Electricity, Closets/Alcoves,

Plumbing, Venting

Unpacking

•

machine. Re≠move the foam protecting material and the plastic bag.

•

been unpacked.

•

appliances being unpacked.

•

If you have any doubts, do not use the appliance and call on a qualified

tech- nician.

Inspecting WHEN TO REMOVE SHIPPING BOLTS!

WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE

MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE

MACHINE!

TIPPING THE MACHINE WITHOUT SHIPPING BOLTS, CAN

CAUSE THE INNER DRUM TO IMPACT OTHER INTERNAL PARTS,

THUS DAMAGING THEM. POSITION THE MACHINE AS CLOSE

AS POSSIBLE TO IT'S FINAL POSITION AND THEN REMOVE

SHIPPING BOLTS.

SHIPPING

BOLT

Check the packing box for external damage. It is your responsibility to

Remove the strapping, then slide the cardboard surround off the

Write down the serial number from the box or the back of the machine.

Destroy the carton, plastic bags and foam parts after appliance has

Children should never be left alone or unattended in the area where

Brass Pressure

Regulators

installed on back

of appliance.

Page 5

OWNER RESPONSIBLE

FOR DAMAGE RESULTING

FROM TIPPING MACHINE

AFTER REMOVING

SHIPPING BOLTS. AVOID

TIPPING MACHINE

FORWARD AFTER

SHIPPING BOLTS ARE

REMOVED

√

INSPECT CONTENTS

[ ] Owners Manual

Brass Pressure Regulators

[ ]

(Must be installed on hot and

cold water inlet. Failure to do

so can damage the internal

components and cause water

damage for which the

installer/owner will be re-

sponsible!)

[ ] Warranty Registration Card

[ ] Majestic Literature

[ ] Drain Hose U-Clip (Optional)

[ ] Hoses have washers in both ends.