- ページ 3

コントローラー DecaLED Touch Panel DMX 4のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DecaLED Touch Panel DMX 4 5 ページ。

ページを印刷する

Operation guide

1. ON/OFF

DecaLED

Touch Panel DMX 4 can be connected to a DC power at any voltage from 12V to 24V. When the

indicator of POWER button lights up, the unit powers on and resumes the output setting of last time.

In normal mode, to touch POWER key and hold on for 2s, DecaLED

of standby. At this time, the output is shut down. Touch the power key once again and hold on for 2s, the unit

is powered on.

Setting Shortcut for Power ON/OFF

If this shortcut is not set, you will need to touch and hold the ON/OFF button for 2 seconds to turn the controller

on or off. If the shortcut is set, the DecaLED

of the ON/OFF button.

•

Touch "Program" key and "Power" key simultaneously and hold on for about 10 seconds until all keys flash

momentarily once.

•

Touch "Power" key once, DecaLED

key on the panel, DecaLED

•

To delete power shortcut, touch "Program" key and "Power" key simultaneously and hold on for about 10

seconds until all keys flash once.

Setting Fadetime for Power ON/OFF

•

To set power on/off fadetime, follow the procedures below:

•

Touch "Power" key and hold on for 5 seconds till all LED indicators flash once. Then release the Power key

and the key flashes repeatedly.

•

Touch any one of these keys--1, 2, 3, 4, Program, Color, Brightness or Speed.

•

All indicators flash momentarily once to confirm the setting.

•

The existing mode ends and changes to normal mode automatically.

Different keys represent different fadetime:

2. Built-in Program

Hold on pressing "Program" key for about 1s to enable built-in Program Menu, the key clicks and the indicator

is lit. Then rotate the touch toggle to select a desired built-in program. There are 10 built-in programs plus an

Auto Program for user selection ("Auto Program" is the sequential running of these 10 built-in programs).

The process of selecting the built-in programs produces clicks and each click will activate one program.

3. Brightness

To enable Brightness Menu, hold on pressing "Brightness" key for about 1s, the key clicks and the indicator lights

up. Then rotate the touch toggle to adjust the brightness as you wish. In clockwise, the brightness increases; In

anti-clockwise, the brightness decreases.

NOTE: The value of brightness can be adjusted in the range of 0 to 255.

4. Speed

To enable Speed Menu, hold on pressing the "Speed" key for about 1s, the key clicks and the indicator lights

up. Then rotate the touch toggle to adjust the speed of running built-in programs in the range of 0.2s~10min.

In clockwise, the speed will increase;In anti-clockwise, the speed will decrease.

When you rotate the toggle to reach 10min, the click disappears and all the four figure keys flash repeatedly.

Then you select the speed which you wish by pressing any of the figure keys. Different figure keys stand for

different speed -- "1" for 10min, "2" for 20min, "3" for 30min and "4" for 40min.

Touch Panel DMX 4 changes to standby condition. Directly touch any

Touch Panel DMX 4 starts up.

Keys

Fadetime

Touch Panel DMX 4 will respond immediately with a single touch

Touch Panel DMX 4 switches to the state

P/C/B/S

0s (no fade)