- ページ 11

配管製品 Bristan Z TC 1/2 CのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bristan Z TC 1/2 C 16 ページ。 Temperature controlled time flow tap

ページを印刷する

Maintenance

Cleaning the Cartridge

Before carrying out any maintenance,

turn off both water supplies and close any

isolating valves.

Prise out the handle cover cap, loosen the

grub screw and remove the handle.

Remove the temperature limiter and

spring.

Unscrew the locking nut using a suitable

box spanner. Using suitable grips pull the

cartridge retaining shroud out from the

body. The cartridge assembly will come

out attached to the cartridge retaining

shroud.

Pull the cartridge retaining shroud away

from the cartridge assembly.

Remove the cartridge assembly cover

and unscrew the locking ring. Push the

cartridge spindle out from the spindle

housing and clean all parts under clean

running water.

Reassemble the cartridge (ensuring the

cut out in the bottom of the cartridge is

pointing towards the front when reﬁ tted)

and grease all 'O'rings with a suitable

silicon grease.

Replace the cartridge assembly and push

the cartridge retaining shroud into the tap

body. Secure the cartridge assembly by

screwing the locking nut onto the tap body

using a suitable box spanner.

Replace the spring and temperature

limiter and push the handle back onto

the spindle. Tighten the grub screw and

push-ﬁ t the cap into position.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Locking

Nut

Disassemble and

reassemble

Spindle

housing

Spindle

Piston

assembly

Piston

housing

Locking Ring

Cartridge Retaining

Shroud

Cartridge

Assembly

Cartridge

Assembly

Cover

Remove cartridge

assembly cover

Cut

Out