- ページ 10

室内暖炉 Majestic fireplaces UVSRC36のPDF ホームオーナーズ・インストレーション＆オペレーティング・マニュアルをオンラインで閲覧またはダウンロードできます。Majestic fireplaces UVSRC36 14 ページ。 Ventless fireboxes

UVSRC Series Fireboxes

Install Hood

A hood is furnished with the firebox. Optional hoods

listed on Page 12 may be installed as shown in Figures

16 and 17. Failure to do so may create a fire hazard.

WARNING: When the black surround is covered by a

brick surface, (Figure 16), use an extended hood. The

hood should extend out to the brick surface (Figures 16

and 17) and be attached to the firebox. The maximum

brick to noncombustible surface that may extend out

past the black surround surface is 4 ".

Maintenance

Keep the control compartment, logs and burner area

surrounding the logs clean by carefully vacuuming or

brushing at least twice a year or as necessary.

THE LOGS CAN GET VERY HOT — HANDLE ONLY

WHEN COOL.

Always turn off the gas to the pilot before cleaning. For

relighting, refer to the lighting instructions located on

the Rating Plate of the gas log set.

Never obstruct the flow of combustion and ventilation

air. Keep the front of the appliance clear of all obstacles

and materials.

Leave at least a 36" clearance from the front of the

firebox to any room furnishings.

4 " Max.

Brick Surface

Extended Hood

Fig. 16 Side view of firebox with extended hood.

Top of Fireplace

Surround

Screw

(Fastens to side rail

from inside hood)

Use

Bottom

Slot

Fig. 17 Hood location.

FP612a

Slot

Screw

FP613a

20002068