- ページ 6

ストリング・マシン Gamma 6004のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma 6004 20 ページ。 6 point mounting
Gamma 6004 にも： オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ), オーナーズマニュアル (19 ページ)

ページを印刷する
Gamma 6004 オーナーズマニュアル
ASSEMBLY INSTRUCTIONS
Bellows Installation
The bellows assembly is supplied in two
pieces and should be assembled as follows.
Place the bellows section with the flange over
the upper support column with the flange on
the top. Place the remaining bellows over
the upper support column and mate it with
the flange on the lower bellows.
Tool Tray Installation
Lower the tool tray over the top of the upper
column support and let it rest loosely on the
bellows assembly.
Tension Track Installation
Place the tube of the tension track assembly
over the top of the upper column support and
align the tension track with the long leg of the
base. Securely tighten the two socket set
screws on the tension track assembly tube,
locking it to the upper column support. Align
the notch in the tool tray with the tension
track bar while raising the tool tray. Secure
the tray with the set screws in the side of
the tray casting.
6