- ページ 6

ストリング・マシン Gamma PROGRESSION 602のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma PROGRESSION 602 12 ページ。
Gamma PROGRESSION 602 にも：オーナーズマニュアル (16 ページ)

STRINGING THE FRAME

Setting Tension

To set the stringing tension, loosen the locking knob on

the side of the drop weight. Slide the weight in the

appropriate direction until the face closest to the string

gripper is indexed with the desired tension mark on the

tension bar.

The drop weight is of a two piece design.

When

assembled, it will accomodate tensions from 20 lbs. to

90 lbs. For tensions from 8 to 20 lbs., remove the 5mm

bolt on the face of the drop weight, and use the smaller

portion of the weight as described above.

Note: Tensions above 77lbs. require removal of the drop

weight bar endcap.

Clamping the First Main String

To begin stringing the main strings, thread the two ends

of the string through the two center holes at the appro-

priate end of the frame and continue through the oppo-

site center holes. Thread one end of the string through

the adjacent grommet hole and pull excess by hand.

Using a floating clamp, secure the center and the

adjacent string to each other on the inside of the frame.