産業機器 Centrometal CM WiFi-boxのPDF テクニカル・インストラクションをオンラインで閲覧またはダウンロードできます。Centrometal CM WiFi-box 2 ページ。
ページを印刷するHEATING TECHNIQUE
Technical instructions
ENG
for connecting of CM WiFi-Box
to the boilers PelTec, Cm Pelet-set touch,
EKO-CKS P UNIT, EKO-CKS Multi Plus,
BioTec-L, BioTec Plus
CM WiFi-box
1.0. DELIVERY CONTENT
UTP cable
CM WiFi-Box
1X
1X
PelTec - on the rear board with connectors
UTP
UTP cable
Cm Pelet-set touch to the UTP connector
-
on the back side of CPREG-touch
Regulation CPREG-Touch
2.0 CONNECTING CM WIFI-BOX TO THE BOILER BY UTP CABLE
BEFORE ANY WORK ON THE BOILER, ELECTRIC ENERGY MUST BE SWITCHED OFF!
PELTEC, CM PELET-SET TOUCH, BIOTEC-L >>> switch off the boiler and remove the plug from the socket.
EKO-CKS P UNIT, EKO-CKS Multi Plus >>> switch off the boiler and set MAIN SWITCH on junction box to "OFF"
2.1 OPTION - FROM EXISTING ADDITIONAL EQUIPMENT
2.2 OPTION - DIRECTLY FROM BOILER
BioTec-L - on board with
connectors inside of boiler
electronic
UTP
BioTec-Plus - to the free UTP
EKO-CKS P UNIT and EKO-CKS Multi Plus - to the free
connector (in the UTP splitter)
UTP socket on the bottom of boiler junction box. (The
on board with connectors inside
boiler control automatically recognizes Cm WiFi-box
of boiler electronic.
without regardless of which UTP socket is connected).
UTP
UTP
Splitter
(example)
CM WiFi-box
CM2K
UTP cable
UTP cable
UTP cable
CM WiFi-box
UTP
CONNECT TO NEXT
UTP cable
ADDITIONAL EQUIPMENT
(only if exist)
CONNECT TO NEXT
ADDITIONAL
EQUIPMENT
(only if exist)
At the bottom of the CM WiFi box
is a sticker with which you can
attach WiFi-box to the wall, boiler
etc.