- ページ 16

ストリング・マシン Gamma Progression ElsのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Progression Els 19 ページ。
Gamma Progression Els にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)

ページを印刷する

1. Maintenance & Adjustments

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps

String slips in gripper

String clamp base slips on turntable

Electrical system does not function

String tension too tight or too loose

With time and use, the clamping surfaces of your machine may become oily or dirty and

result in string or clamp slippage while stringing. Periodic cleaning of the String Clamps,

String Clamp Base, and String Gripper is recommended. Knife sharpening stones work well

for cleaning the diamond coatied string clamping surfaces. Cleaning with a solvent such as

isoproyl alcohol and a mild abrasive tool such as a toothbrush also works well to remove oily

or greasey build up.

CARE & CLEANING

SOLUTION

- Adjust gap between clamp jaws

- Clean clamp jaws

- Clean gripper jaws

- Make sure string is wrapped over

top jaw of gripper prior to inserting

between gripper jaws

- Clean bottom of clamp & glide bar

with alcohol

- Adjust clamp base locking nut

- Check power source

- Check power cord connection

- Check tension using a tension

calibrator, adjust machine

calibration if necessary