- ページ 10

ストリング・マシン Gamma X-6のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma X-6 16 ページ。
Gamma X-6 にも：オーナーズマニュアル (15 ページ)

STRINGING THE FRAME

Clamping the String

Clamp the tensioned string to the next ad-

jacent string using the second string clamp.

Release the string from the gripper by raising

the tension arm.

Repeat the procedure for all of the remaining

main strings and tie off following the racquet

manufacturers recommendations.

Weaving the Cross Strings

Follow the manufacturer's recommended

stringing pattern for one or two piece stringing.

This will determine the starting point for the

cross strings. If applicable, tie the ﬁ rst cross

string using an appropriate starting knot.

Weave the cross strings over and under the

main strings being careful to alternate the

weave of each consecutive cross string so

as to be opposite of the previously installed

cross string.

Completing the String Job

Once the ﬁ nal cross string is tensioned and

clamped, tie off at the appropriate hole speci-

ﬁ ed by the racquet manufacturer.

Remove the frame from the mounting system

by loosening the shoulder supports and

frame supports.