- ページ 5

家庭用電化製品 Centrometal CSK-TouchのPDF 設置、使用およびメンテナンスに関する技術的な指示をオンラインで閲覧またはダウンロードできます。Centrometal CSK-Touch 8 ページ。 Digital room corrector

ページを印刷する

Settings

3.2. Views

In the Views menu, you can define the number of views or correctors that can be monitored on this

digital corrector and define the name of each view and assign it a heating circuit that it controls. On

the main screen, depending on the number of views selected, the letters of the view appear in the

menu bar (from A to H, user-assigned names are only visible on the selected screen, not in the

menu bar). If there are more than 2 views, the other views are selected by pressing the "..." menu

(three dots) followed by the other selected views. After clicking on one of the desired views, the

menu bar returns to the possible selection of the first 2 views.

menu bar

3.2.1. No. of views

Selects the number of views or associated room correctors that can be controlled via this digital

corrector. If only this digital corrector exists, the

number 1 must be selected

3.2.x. View A/B/C/D/E/F/G/H

3.2.x.1. View Name

Each view can have a name according to the user's wishes (eg Living Room, Ground floor ...).

3.2.x.2. Heating circuit

Each view must be assigned a heating circuit wich is controled by this view (usually each corrector

controls its own heating circuit).

3.3. Measurement corr.

If the measured temperature on the digital corrector

deviates from the actual room temperature, in this menu the measured temperature on the digital

corrector screen can be corrected.

3.4. Display

Menu for changing the settings of the digital corrector screen.

3.4.1. Background

Selects the background image of the screen that will

be displayed in the normal operation of the corrector.

3.4.2. Backlight

The intensity of the backlight when the corrector is in normal operation or when the settings are

changed.

3.4.3. Weather forecast

If the CM-WiFi box is connected to the Internet, there is below the measured room temperature a

weather forecast for the place where the CM-WiFi box with the currently read temperature from the

server (with the date and hour of reading the current temperature and forecast) and the weather

forecast for today appears and for the next four days (with a minimum and maximum daily

temperature). If the CM WiFi box is not connected to the Internet, the current forecast will not be

displayed on the screen. Then it is recommended to turn off the weather forecast and it will not

longer be displayed on the screen.

Factory:

Weather forecast

FIRST TURNING ON

Before turn on the corrector for the first time, it is necessary to configure the heating circuit on the

boiler / CM2K module to which the corrector will be connected. On the boiler control in the

Regulator menu, in the selected heating circuit, in the Corrector menu, it is necessary to select

Digital corrector, and in the menu Addr. dig. corrector, select the desired corrector address (the

same must be selected on the corrector later ) .After starting the corrector for the first time, a menu

will appear on the first screen to select the desired corrector language. The desired language of the

corrector doesn't have to be the same as the language of the boiler. To select the desired language

for the corrector, press the flag of the desired language on the screen.

Factory:

min./max.

No. of views

1 / 8

Factory:

min./max.

Heating circuit

0 / 255

Factory:

min./max.

Measurement corr.

-5.0 / 5.0 °C

After selecting the language on the ﬁrst screen the indicator ﬂashes that the corrector is not

connected to the boiler. The corrector is adjusted in the menu Menu -> Settings. The menu 3.1.1.

Connection type selects how the corrector will be connected to the boiler / CM2K module. If the

Factory:

min./max.

corrector is connected via the CM-WiFi box (currently the only option), the correct WiFi ID from the

menu Info on the boiler control must be entered in the corrector menu 3.1.2. WiFi ID.

Background

1 / 6

Backlight

100

30 / 100 %

setting

OFF / ON

If a speciﬁc corrector address is selected on the boiler control unit (if there is more than one digital

corrector, selection of the address of each individual corrector is obligatory), the same address

should be selected on the corrector in the menu 3.1.3. Corrector address.

The corrector can be connected to the boiler / CM2K either directly via the CM-WiFI box or through

another digital corrector. If you want to connect the corrector directly to the boiler / CM2K, in the

menu 3.1.4. Destination address you need to select a WiFi box, and if you want to connect the

corrector to the boiler / CM2K via another corrector (in case the corrector cannot receive the CM-

WiFi box signal ), in the menu 3.1.4. Destination address it is necessary to select the address of

another corrector to be connected.

Technical instructions CSK-Touch

The screen must not be pressed (with your finger ...) when connecting the the room

corrector to the el. power supply. If the screen of the corrector is pressed on arrival

the el. power supply (the screen shows 'Firmware update'), the corrector enters the

software insertion mode which can only be used by authorized serviceman. If the

screen is accidentally pressed, it is necessary to turn off the power on the corrector

and turn it on again without ever pressing the screen to get the corrector ready for

operation.

The CSK-Touch room corrector can be connected to a CM-WiFi box with software

version v.1.11 or later and a Peltec / -L boiler with software version v.2.86 or later.

WiFi ID

Technical instructions CSK-Touch

First turning on

Corrector software

version

Page scroll

Language selection

Boiler sofware version

Software vesrion of

CM-WiFi box