- ページ 14

ストリング・マシン Gamma X-STのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma X-ST 19 ページ。
Gamma X-ST にも：オーナーズマニュアル (19 ページ), オーナーズマニュアル (19 ページ)

MAINTENANCE & ADJUSTMENTS

Adjusting the Tensioner Brake

Step 1

After stringing many racquets, the brake of

the tensioner may need to be adjusted.

With the brake lever engaged, loosen the

lock bolt located on the back side of the

tensioner frame with the 4mm hex wrench.

Note: The lock bolt should only be loosened

enough to be turned by hand and must not

be removed completely.

A - Lock Bolt

Adjusting the Tensioner Brake

Step 2

With the lock bolt loosened and the brake

lever engaged in the latch, insert the 6 mm

hex wrench through the hole in the tensioner

cover and into the (B) brake lever adjusting

bolt.

B - Brake Lever Adjustment Bolt

Adjusting the Tensioner Brake

Step 3

To tighten the braking mechanism, turn the

brake lever adjusting bolt counter clock-

wise by about 1/8 turn. Retighten the lock

bolt on the back side of the tensioner frame

and check for brake tightness. The tensioner

should move freely along the track with the

brake lever engaged and should hold ten-

sion with the brake lever released. If more

adjustment is needed, repeat steps above

until properly adjusted.

Note: Cover Removed For Clarity