- ページ 10

メディア・コンバーター Decimator 12G-CROSSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Decimator 12G-CROSS 13 ページ。 Hdmi / sdi 4k cross converter with scaling and frame rate conversion

ページを印刷する

Colour:

(Has SUB-MENUs)

M.V. Colours

SDI 3G IN

709 (Default)

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.

Press the < and > buttons to move left or right respectively through the 11 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

The Colour Menu controls the colour space of the signal on the HDMI or SDI outputs.

1. Colour / SDI 3G IN (Parameter)

This option controls how the payload ID is handled on the SDI input at 3G. If no payload ID is detected, the

default option will be used. If the setting is set to always, then no matter what is detected in the Payload ID,

that colour space will be used.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 709 (Default)

2.) 2020 (Default)

3.) 709 (Always)

4.) 2020 (Always)

2. Colour / SDI 6G/12G IN (Parameter)

This option controls how the payload ID is handled on the SDI input at 6G/12G. If no payload ID is detected,

the default option will be used. If the setting is set to always, then no matter what is detected in the Payload

ID, that colour space will be used.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 2020 (Default)

2.) 709 (Always)

3.) 2020 (Always)

4.) 709 (Default)

3. Colour / HDMI 3G IN (Parameter)

This option controls how the AVI (Auxiliary Video Information) InfoFrame is handled when a 3G format is

detected on the HDMI input. If AVI InfoFrame is detected, the default option will be used. If the setting is set

to always, then no matter what is detected in the AVI InfoFrame, that colour space will be used.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 709 (Default)

2.) 2020 (Default)

3.) 709 (Always)

4.) 2020 (Always)

4. Colour / HDMI 6G/12G IN (Parameter)

This option controls how the AVI (Auxiliary Video Information) InfoFrame is handled when a 6G/12G format is

detected on the HDMI input. If AVI InfoFrame is detected, the default option will be used. If the setting is set

to always, then no matter what is detected in the AVI InfoFrame, that colour space will be used.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 2020 (Default)

2.) 709 (Always)

3.) 2020 (Always)

4.) 709 (Default)

12G-CROSS OPERATING MANUAL VERSION 1.0

E&OE

Main Menu

<==

Sub Menu

Parameter Window