- ページ 9

DJ機材 Gamma Nano BeamのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Nano Beam 13 ページ。 60w led beam with rgbw color mixing

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

Nano Beam – GAMMA LED Vision

Page 9 of 13