- ページ 5

サーモスタット Jakka CK5のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Jakka CK5 9 ページ。
Jakka CK5 にも：ユーザーマニュアル (8 ページ)

ROOM THERMOSTATE

FEATURES OF ROOM THERMOSTATE:

A. ) HOW TO MAKE WEEKLY PROGRAMMING:

• Press FAN button for two (2) seconds while the unit is on.

• You will see "00" at the upper-right part of the screen, then press Mode / OK button.

• You can select starting and stopping time for each day of the week with UP and

DOWN buttons on the weekly programming screen. Go on by pressing Mode/OK button.

• To go back to previous screen and/ or to exit , use ON/OFF button.

Note1 : Unit will not work if starting time is later than stopping time.

Note2 : Unit will not work if starting time is same with stopping time.

Note3 : There will be a clock symbol on the screen, if unit works in weekly programmed

hours.

Note4 : There will be a clock deleting symbol on the screen, if unit works out of weekly

programmed hours.

B.) SETTING DATE AND TIME:

• Press Fan button for two (2) seconds while the unit is on.

• You will see "00" at the upper-right part of the screen, then change it to"01" by using UP

and DOWN buttons, then press Mode/OK button.

• Set hour/minute by pressing UP and DOWN buttons then go on by pressing Mode/OK

• Set day/month by pressing UP and DOWN buttons then go on by pressing Mode/OK

• Set year by pressing UP and DOWN buttons then go on by pressing Mode/OK

• Set name of the day by pressing UP and DOWN buttons then go on by pressing Mode/OK

C.) CHANGING UNIT MODE:

• The mode can be selected by pressing Mode/OK button when the unit is on.

• When the unit is at manual heating, manual cooling or fan mode, by pressing Mode/OK

button fan speed and set temperature can be adjusted. You can go to next screen by

pressing Mode/OK button

• When the unit is at auto mode, passing to the next mode is possible by pressing Mode/OK button

D.) CHANGING SET TEMPERATURE:

• When unit is on and in auto mode, using UP and DOWN buttons ,set temperature number

will start blinking. Set temperature can be selected by pressing UP and DOWN buttons.

• When unit is on and in manual mode, using UP and DOWN buttons ,set temperature number

will start blinking. Set temperature can be selected by pressing UP and DOWN buttons.

Control kit