- ページ 10

室内装飾品 IKEA SKYTTAのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。IKEA SKYTTA 16 ページ。
IKEA SKYTTA にも：インストレーション・マニュアル (16 ページ)

Height options

Check the height from floor to ceiling

During the buying process you decided how the system

should fit your ceiling height. You will have encountered one

of these scenarios when planning your SKYTTA solution.

• One of the two system heights has created a perfect fit in

your space.

• There is a small space left above the system.

• The ceiling height reducer has been planned in, as there is

a lot of space left above the system.

No adjustments needed to your space

If your doors fit your space perfectly, you can continue to

page 11 to get some general tips to have in mind before

assembly starts.

Reduce door height

If your doors are too tall for your space, you can reduce

their height. First see general tips on page 8-9, and then

continue to page 12 and follow the Assembly Instructions.

• The height of the ceiling/opening is lower than the door,

so the door(s) will need to be cut to fit.

If this detail has been missed and you don't have a plan for

how to adjust your plan to achieve the correct system height,

you need to do this before continuing. Use the SKYTTA plan-

ning tool.

Reduce ceiling height

If your ceiling height is too high and you need to fill in this

space, see page 8-9 for general tips. Then continue to page

10-11, to find the solution that's suitable for you, and follow

the Assembly Instruction.

Sloping ceiling solution

If you want to install SKYTTA sliding doors onto a sloped

ceiling, you need to leave extra wall space to create a 90

degree angle with the wall. See detailed information on

page 15 and follow the Assembly Instructions.