- ページ 3

スポットライト Gamma Led Vision TX-6 ZのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Led Vision TX-6 Z 19 ページ。 350w led spot with cmy color mixing

Introduction and Setup

Thank you for choosing the TX-6 Z from GAMMA LED Vision. You will see you have acquired

a powerful and versatile moving light.

Inside the box you should find:

•

TX-6 Z Fixture:

•

Attached, Fold-Down Clamps with Omega Brackets

•

DMX Cable

•

1m PowerCon to Edison Cable

(Flight case and Safety cable are optional, please contact your dealer)

Please check carefully that there is no damage from shipping. Should there be any problems,

please consult your dealer and don't use the light until you've verified it's good to go!

Before installation, please read the user manual carefully, then prepare Omega Brack-

ets (2 pcs), Clamps (2 pcs), and Safety Cable (1 pc).

Clamp Mounting: The TX-6 Z provides provides fold-down clamps which sit attached to

Omega Brakcets which then attach to base on the unit. We promise it's less confusing

than it sounds.

The folding clamps can swivel freely, and the swivel is tightened down via an allen

wrench. The clamps do not have to be removed for floor-standing operation.

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly.

TX-6 Z– GAMMA LED Vision

Page 3 of 19