- ページ 16

スポットライト Gamma Led Vision TX4 SpotのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Led Vision TX4 Spot 18 ページ。 150w spot moving head

3. Maintenance

Routine

Maintenance

The following points have to be considered during the inspection:

1) All screws for installing the devices or parts of the device have to be tightly

connected and must not be corroded.

2) There must not be any deformations on the housing, color lenses, fixations and

installation spots (ceiling, suspension, trussing).

3) Mechanically moved parts must not show any traces of wearing and must not rotate

with unbalances.

4) The electric power supply cables must not show any damage, material fatigue or

sediments.

Further instructions depending on the installation spot and usage have to be adhered by

a skilled installer and any safety problems have to be removed.

In order to make the lights in good condition and extend the life time, we suggest a

regular cleaning to the lights.

1) Clean the inside and outside lens each week to avoid the weakness of the lights due

to accumulation of dust.

2) Clean the fan each week.

3) A detailed electric check by approved electrical engineer each three month, make

sure that the circuit contacts are in good condition, prevent the poor contact of circuit

from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth.

Never use alcohol solvents.

There are no serviceable parts inside the device. Please refer to the instructions under

"Installation instructions".

Should you need any spare parts, please order genuine parts from your local dealer.

TX4 Spot – GAMMA LED Vision

Page 16 of 18