- ページ 14

室内装飾品 IKEA SYMFONISKのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA SYMFONISK 37 ページ。 Wifi bookshelf speaker
IKEA SYMFONISK にも：マニュアル (41 ページ), マニュアル (24 ページ), マニュアル (24 ページ), マニュアル (12 ページ), マニュアル (28 ページ), クイックマニュアル (28 ページ), マニュアル (8 ページ), マニュアル (20 ページ), マニュアル (8 ページ), 取扱説明書 (8 ページ), マニュアル (28 ページ), マニュアル (36 ページ), クイック・スタート・マニュアル (8 ページ)

Equalization settings

The SYMFONISK ships with the equalization settings preset to provide

the optimal playback experience. If desired, you can change the sound

settings (bass, treble, balance, or loudness) to suit your personal

preferences.

Note: Balance is only adjustable when the SYMFONISK is used in a stereo pair.

1. On a mobile device, go to More -> Settings -> Room Settings.

2. Select a room.

3. Select EQ, and then drag your finger across the sliders to make

adjustments.

4. To change the Loudness setting, touch On or Off. (The loudness

setting boosts certain frequencies, including bass, to improve the

sound at low volume.)

If you purchase a new router or change your ISP (Internet service

provider), you will need to restart all your Sonos products after the router

is installed.

Note: If the ISP technician connects a Sonos product to the new router, you only need to

restart your wireless Sonos products.

1. Disconnect the power cord from all of your Sonos products for at least

5 seconds.

2. Reconnect them one at a time, starting with the Sonos product that is

connected to your router (if one is usually connected).

Wait for your Sonos products to restart. The status indicator light will

change to solid white on each product when the restart is complete.

If your Sonos setup is completely wireless (you don't keep a Sonos

product connected to your router), you will also need to change your

wireless network password. Follow the steps below:

1. Temporarily connect one of your Sonos speakers to the new router with

an Ethernet cable.

2. Go to More -> Settings -> Advanced Settings -> Wireless Setup.

Sonos will detect your network.

3. Enter the password for your wireless network.

4. Once the password is accepted, unplug the speaker from your router

and move it back to its original location.