- ページ 4

アウトドアカート DECK DOLLY JD 3 SeriesのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。DECK DOLLY JD 3 Series 7 ページ。

3) Preassemble the bottom cross support tube and brackets as shown with ¼ "x 2 ¼"

bolts while leaving the nuts loose.

4) Preassemble the Upper Deck Support as shown below with 4 - 7/16" nuts.

5) Preassemble the Base Plates and Tires as shown below. The regular nut should be on

the inside and the serrated nut should be to the outside of the base plate. Take care

to tighten the bolt and nuts to allow the tire to spin freely but not be loose on the

bolt. Use 2 ½" x 3 ¼" bolts with hex nut between tire and bracket and flange nut on

outside of plate.