- ページ 6

アウトドアカート DECK DOLLY JD 7 SeriesのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。DECK DOLLY JD 7 Series 8 ページ。 With 7 iron deck and others

9) Install the brackets as shown below. Depending on how your deck is set up, you may

have to install the brackets on the inside of the uprights. Leave these bolts loose at

this time.

Assembly Instructions:

Starting from the bottom hole of the 5, place a 5/16 x1 ¼ bolt in bottom

bracket hole, see pics above.

II.

Place a 5/16 x 1 ½ bolt through spacer and safety latch into top bracket

hole.

III.

Insure that the latch is properly orientated as shown above.

10)

With the Deck Dolly preassembled, lay the unit over the deck and align the

brackets with the rod in the deck mount. Depending on how it fits you may have to

move the brackets to the other side of the Upright. The brackets have two sets of

holes and the key thing to remember is that the wheels are close or just touching the

ground when in the horizontal position. After insuring proper fit you may now

tighten those bolts.