ページを印刷する
ENGLISH
The Duration
not operate with the core
temperature sensor.
The oven calculates the
approximate cooking time, it may
change during cooking.
You can change the core temperature at
any time during the cooking:
1. Press
:
• one time - the display shows the set
core temperature which changes
every 5 seconds to the current core
temperature.
• two times - the display shows the
current oven temperature which
changes every 5 seconds to the set
oven temperature.
• three times - the display shows the
set oven temperature.
2. Use the control knob to change the
temperature.
Using the telescopic runners
Keep the installation instructions
for the telescopic runners for
future use.
Additional functions
Using the Child Lock
When the Child Lock is on the oven cannot
be turned on accidentally.
1. Ensure the knob for the oven functions is
in the off position.
2. Press and hold
same time for 2 seconds.
The signal sounds. SAFE and
the display. The door is locked.
The symbol
display also when Pyrolysis
function operates.
To turn off the Child Lock, repeat step 2.
and End
do
and
at the
appear on
appear on the
With telescopic runners you can put in and
remove wire shelves and trays easily.
Caution! Do not clean the
telescopic runners in the
dishwasher. Do not lubricate the
telescopic runners.
1
°C
Pull out the right
and left hand
telescopic runners.
Make sure you push back the telescopic
runners fully in the oven before you close
the oven door.
Warning! Refer to "Product
description" chapter.
Residual heat indicator
When you turn off the oven, the display
shows the residual heat indicator
temperature in the oven is more than
40 °C.Turn the control knob left or right to
check the oven temperature.
Automatic Switch-off
For safety reasons the oven turns off
automatically after some time if a heating
function operates and you do not change
the oven temperature.
2
Put the wire shelf on
the telescopic
runners and
carefully push them
into the oven.
if the
17
°C