- ページ 12

計測機器 Major tech MT720のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech MT720 16 ページ。 Ac trms clamp meter

7.6. Frequency Measurements

1. lnsert the black test lead banana plug into the negative COM jack and

the red test lead banana plug into the V

positive jack.

2. Set the function switch to the V~HZ/% Position.

3. Press MODE button to select the Frequency (Hz) or Duty cycle (%).

4. Touch the test probe tips across the part under test.

5. Read the value on the display.

6. The display will indicate the proper decimal point and value.

1. Set the function switch to the TEMP position.

2. lnsert the Temperature Probe into the negative COM and the

CAP TEMP Hz% Ω positive jacks, observing polarity.

3. Touch the Temperature Probe head to the device under test.

Continue to touch the part under test with the probe until the

reading stabilizes.

4. Read the temperature on the display. The digital reading will indicate

the proper decimal point and value.

5. Use the MODE button to select °F or °C.

WARNING: To avoid electric shock, be sure the thermocouple

probe has been removed before changing to another measurement

function.

1. lnsert the black test lead banana plug into the negative COM jack

and the red test lead banana plug into the V

Ω positive jack

2. Turn the function switch to Ω

to select the diode function if necessary (diode symbol will appear

on the LCD when in Diode test mode)

3. Touch the test probe tips to the diode or semiconductor junction

under test. Note the meter reading

4. Reverse the test lead polarity by reversing the red and black leads.

Note this reading

5. The diode or junction can be evaluated as follows:

• If one reading displays a value (typically 0.400V to 0.900V) and

the other reading displays OL, the diode is good.

• If both readings display OL the device is open.

• If both readings are very small or '0', the device is shorted.

CAP TEMP Hz% Ω

CAP TEMP Hz%

position. Use the MODE button