- ページ 3
計測機器 Major tech MT935のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech MT935 8 ページ。 Phase rotation meter with rotary field direction
Major tech MT935 にも: 取扱説明書 (8 ページ)
1. INTRODUCTION
The MT935 is a handheld, battery-operated meter designed to detect the
rotary field of three-phase systems and determine motor-rotation direction.
2. SYMBOLS
The following symbols appear on the Meter or in this manual.
Risk of electric shock
Risk of Danger, Important information see manual.
Hazardous Voltage.
Equipment protected by double or reinforced insulation
Battery
Earth
AC or DC
Conforms to EU directives
Overvoltage (Installation) Category III. Pollution Degree 2 per
ICE 1010-1 refers to the level of Impulse withstand voltage
protection provided. Equipment of Overvoltage Category III is
equipment in fixed installations (e.g. electricity meter and
primary over-current protection equipment).
3. SAFETY INFORMATION
CAUTION identifies conditions & actions that may damage the meter.
WARNING identifies conditions & actions that pose hazard to the
user. To avoid possible electric shock or fire, do the following:
• Read the safety information carefully before using or servicing this meter.
• Adhere to local and national safety codes.
• Individual protective equipment must be used to prevent shock and
injury.
• Using this meter in a manner not specified by Major Tech may impair
safety features/protection provided by the equipment.
• Avoid working alone.
• Inspect the test leads for damaged insulation or exposed metal. Check
test lead continuity, damaged leads must be replaced, do not use the
meter if it appears to be damaged.
• Be careful when working above 30V AC RMS, 42V AC peak and 60V DC,
such voltages pose a shock hazard.
• When using the probes, keep fingers away from probe contacts, keep
fingers behind the finger guards on the probes.
• Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
3