- ページ 10

オーブン IKEA DATIDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。IKEA DATID 18 ページ。 30" (76.2 cm) wall-mount canopy range hood
IKEA DATID にも：ユーザーマニュアル (16 ページ), インストレーション・マニュアル (12 ページ), マニュアル (24 ページ)

ページを印刷する

7. Place the assembled air deflector and duct over the exhaust

outlet from the hood.

8. Reassemble the air deflector to the duct cover bracket with

2 assembly screws.

9. Seal connections with vent clamps.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Remove terminal box cover.

3. Remove the knockout in the terminal box and install a UL

listed or CSA approved ¹⁄

4. Run home power supply wiring through ¹⁄

terminal box.

A. UL listed wire connectors

B. White wires

C. Black wires

D. Green (or bare) wire connected to

yellow-green wires

E. Home power supply

5. Use UL listed wire connectors and connect white

wires (B) together.

" strain relief.

" strain relief into

6. Use UL listed wire connectors and connect black wires (C)

together.

WARNING

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire

in terminal box.

Failure to do so can result in death or electrical shock.

7. Connect green (or bare) ground wire from home power

supply to the 2 yellow-green ground wires (D) in terminal

box using UL listed wire connectors.

8. Tighten strain relief screw.

9. Install terminal box cover.

10. Reconnect power.

Install Vent Covers

1. When using both upper and lower vent covers, push lower

cover down onto hood and lift upper cover to ceiling and

install with two 2.9 x 6.5 mm screws.

NOTE: For vented installations, the upper vent cover may be

reversed to hide slots.

A. Upper vent cover

B. Lower vent cover

C. 2.9 x 6.5 mm screws

D. Bracket