家庭用照明 JALEXANDER JAE0460のPDF マニュアルをオンラインで閲覧またはダウンロードできます。JALEXANDER JAE0460 4 ページ。 Table lamp

ページを印刷する

MODEL #: JAE0460

JAE0460-T20

(LED bulb included)

TABLE LAMP

IMPORTANT SAFETY INSTRUCTIONS

Read and Save:

1. To reduce the risk of electric shock, this lamp has a

polarized plug (one blade is wider than the other ).

The plug will fit in a polarized outlet only one way. If the

plug does not fit fully into the outlet, reverse the plug.

If plug still does not fit, contact a qualified electrician.

Never use an extension cord unless the plug can be

fully inserted. Do not alter the plug.

2. Do not install non-factory wiring or any other electrical

components. Altering or modifying the lamp in any way

will render the product unsafe.

3. Avoid laying objects directly over the power supply cord

to avoid cutting or damaging the wire.

4. Keep curtains, shades, wall hangings and all other fabrics

and objects away from the lamp shade, light switch and

the light bulb. Lamps are not designed to support

additional weight. Do not hang any objects from the

lamp or any lamp part.

5. Place the lamp on a stable, level surface in an area

where the lamp will not be tipped over or bumped.

This lamp is approved for indoor use only.

BULB REPLACEMENT

Use one 100 Watt Maximum, Type A bulb or LED

equivalent bulb.

Use one 7 Watt type C bulb (included) for night light in

the lamp body.

DO NOT EXCEED RECOMMENDED BULB WATTAGE.

1. Turn off and unplug the lamp and allow bulb to cool

before replacing bulb.

2. Light bulb should never touch the lamp shade.

CLEANING AND MAINTENANCE

1. To clean: use a soft, dry cloth only.

2. Do not use chemical or abrasive cleaning solutions.

ASSEMBLY INSTRUCTIONS

1. Place the base (A) on a flat surface.

2. Pull out the socket assembly (F) from the base (A).

Install the light bulb (E) onto the socket assembly (F), and

then insert the socket assembly (F) into the base (A).

3. Remove the socket ring (D) from the socket assembly

(B).

4. Place the shade (C) onto the socket assembly (B), then

secure with the socket ring (D).

5. Install the light bulb onto socket assembly (B).

6. Insert plug into an electrical outlet.

7. Use the rotary switch on socket (B) to adjust the lamp

on and off.

For Customer Assistance:

www.jalexanderhome.com

Made in China