- ページ 9

マルチメーター Major tech MT1877IVのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech MT1877IV 16 ページ。 1000v ac/dc trms multimeter

3.13. CAPACITANCE MEASUREMENT

WARNING: To avoid electric shock, discharge the capacitor under

test before measuring.

1. Set the function switch to the CAP capacitance position. Press the

MODE button until "nF" appears on the display.

2. Insert the black test lead banana plug into the negative COM jack and

the red test lead banana plug into the CAP positive jack.

3. Touch the test probe tips across the part under test.

4. Read the capacitance value on the display.

5. The display will indicate the proper decimal point and value.

1. Set the function switch to the Hz position.

2. Insert the black test lead banana plug into the negative (COM) jack and

the red test lead banana plug into the positive Hz jack.

3. Touch the test probe tips to the circuit under test.

4. Read the frequency on the display. The digital reading will indicate the

proper decimal point, symbols (Hz, kHz, MHz) and value.

The NCV function works on any rotary switch position.

1. Test the detector on a known live circuit before use.

2. Hold the top of the meter very close to the voltage source as shown.

3. If voltage is present, the back light will flash a bright red.