- ページ 10

ガレージドアオープナー Centurion R5のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Centurion R5 17 ページ。 Rotary swing gate operator
Centurion R5 にも：クイック・セットアップ・マニュアル (19 ページ), クイック・セットアップ・マニュアル (2 ページ)

LECTRICAL

WARNING

ONNECT ALL



Connect all cables as required to the control card and battery

charger (See Figure 11 & 12). (IM page 48 & 49)



Check that the power source jumper is in the correct position. (PSU

or STD refer to IM page 27, Fig. 24)

Isolator

Box

To dwelling

Figure 9 Cabling Requirements

All manuals and user guides at all-guides.com

1. Always check that the circuit breaker in the electrical panel is in the

OFF position, and that all high voltage circuits (more than 42.4V) are

completely isolated from the mains supply before doing any work.

2. Ensure that all low voltage systems (Less than 42.4V) are suitably

protected from damage, by disconnecting all sources of power such

as chargers and batteries before doing any work.

3. All electrical work must be carried out according to the requirements

of all applicable local electrical codes.(It is recommended that a

licensed electrical contractor perform such work.)

IRING