- ページ 9

マルチメーター Major tech MT1885のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech MT1885 20 ページ。 1500v dc multimeter

6.3. AC/DC CURRENT MEASUREMENTS

CAUTION: Do not make 10A current measurements for longer than 30

seconds. Exceeding 30 seconds may cause damage to the

meter and/or the test leads.

1. Insert the black test lead banana plug into

the negative COM jack.

2. For current measurements up to 6000µA

AC/DC, set the function switch to the µA

position and insert the red test lead banana

plug into the µA/mA jack, press mode

button to select AC or DC.

3. For current measurements up to 600mA DC,

set the function switch to the mA position

and insert the red test lead banana plug into

the µA/mA jack, press mode button to

select AC or DC

For current measurements up to 10A DC, set

the function switch to the 10A position and

insert the red test lead banana plug into the

10A jack, press mode button to select AC or

DC.

5. Remove power from the circuit under test,

then open up the circuit at the point where

you wish to measure current.

6. Touch the black test probe tip to the

negative side of the circuit. Touch the red

test probe tip to the positive side of the

circuit.

Apply power to the circuit.

8. Read the current on the display.