ページを印刷するINSTALLATION INSTRUCTIONS
This appliance is in Class 1.
The appliance must be used with the gas specified on the rating plate located on the inside of
the drawer door (see details given on the product)
Installation and maintenance of the appliance must be carried out by a qualified technician in compliance
with the conditions established in the applicable regulation documents and the ethical codes.
Securing the cooker to the wall
Drill two holes in the wall approximately 700 mm above the lower edge of the sides of the cooker
(as shown in fig. 1 position F), so that they are concealed by the cooker itself (see Fig. 2).
Insert part R (rawlplug) into holes F and screw hook G into part R (Fig. 3).
Secure the chain to hook G as shown in fig. 4 position C.
Fig. 1
Position F = hole
ø 6 mm
H - adjustable
foot
Fig. 3
18
Fig. 2
Fig. 4
wall
wall
position C