- ページ 5

ヘアードライヤー Gammapiu NA3320MPのPDF 使用マニュアルをオンラインで閲覧またはダウンロードできます。Gammapiu NA3320MP 8 ページ。

ページを印刷する

USE

This appliance is designed for professional use in commercial areas.

Connect the plug to the socket.

The hair dryer has 3 temperature levels and 2 air flow speeds, selectable via separate

switches. If the appliance is fitted with cold air button [C], you can operate it for

hairstyling.

Switch on the appliance using the On/Off switch [A] and select the required speed:

0 0 = OFF

I = mid air flow

II = strong air flow

Press the button to adjust the temperature [B] and select the level you prefer:

I = low temperature

II = mid temperature

III = high temperature

After use, using the On/Off switch [A] to switch off the appliance.

Do not pull the cord or the appliance to disconnect the power cord [G] from the

mains socket.

Store the appliance on a stable surface, paying attention not to wrap the

cord around the appliance.

Cold air button (Cold Shot) [C]

If the appliance is fitted with this button, you can operate it for hairstyling.

Holding the cold air button pressed, the dryer can be switched quickly to operate

with cold air and for hairstyling.

To return to the set temperature, simply release the button.

Using the air concentrator [H]

Thanks to the concentrator, the air is conveyed directly on the brush used for the

hairstyle.

Apply the concentrator and press it in towards the body of the hair dryer (Fig. 3a).

The concentrator can be retrieved by pulling it in the direction indicated by the arrow

b (Fig. 3b).

Wait until the nozzle has cooled down before removing it.

Using the air diffuser [I]

If the appliance has been equipped with the diffuser, this can be used to obtain a

volumising drying.

Apply the diffuser and press it in towards the body of the hair dryer (Fig. 4a).

The concentrator can be retrieved by pulling it in the direction indicated by the arrow

b (Fig. 4b).

MAINTENANCE

In case of malfunction or damage to the appliance or a part of it,

the appliance must be analysed by the manufacturer or the relevant

technical assistance or in any case by a person with similar skills in

order to prevent any risk. The user must not disassemble the device

him/herself.

Remove the plug from the mains socket before cleaning the

appliance.

GENERAL CLEANING

Clean the appliance at least once a week.

To avoid all risk of electric shock, do not clean the appliance with water and do not

dip It into water.

Only wipe the appliance with a soft cloth, dampened if necessary.

Do not use solvents or abrasive detergents!

FILTER CLEANING

To maintain optimum performance of the device over time, you should clean the

filter regularly [E]:

• every day for intensive and continuous use