ページを印刷する
Back Strut
18. Lift each section in turn onto the lower assembly
Countertop, and fix it in place with the Cam Bolts.
19. These sections will join together using the Uprights
between them, as well as one either side of the whole
upper assembly. Lock the Cam Bolts in place via the
access holes where necessary, turning the screwdriver
anticlockwise.
20. Finally, fit the Top in place. You may have one solid
Top, or a Top Lip, or several pieces that fit together. The
Top can be located onto the Box Tops with Dowels, and
fixed in place with glue as needed.
Full Top
Assembly Instructions: Dresser
17. Back Struts add extra support to each section. Place
White Cams in the Back Strut, and then locate the Back Strut
onto the Cam Bolts at the bottom of the Sides, with the White
Cams hidden. You can use the small access holes to lock
them in place – turn the screwdriver anticlockwise to tighten.
If you have multiple sections, you will need to use 45mm
CSK Screws to screw the other side (or both sides) of the
Back Strut into the back of the unit.
NOW ASSEMBLE ANY OTHER SECTIONS
Top Lip
AND YOU'RE DONE!
#jali #dresser #makeityours
Top Lip Set
Fix with
Connector
Page 9 of 9