- ページ 3

セキュリティセンサー Major tech PIR46のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Major tech PIR46 4 ページ。 360 long range infrared motion sensor

Unscrew fixing bracket by rotating anti-clockwise from base of the sensor.

Insert the power cable into the slot provided.

Connect the power cable into the terminal block as per the wiring diagram.

Identify the ideal field of view and use fixing bracket mounting holes to

ensure correct alignment for motion sensor.

Drill holes and screw the fixing bracket to the marked location.

Reconnect the sensor to the fixing bracket by rotating clockwise.

Once installation is complete, turn on the power to test.

6. Wiring Diagram

7. Sensor Information

15m

Height of Installation: 2.2 to 4m

8. Test

Turn the TIME knob anti-clockwise to the minimum (10s).Turn

the LUX knob clockwise to the maximum (sun).

Switch on the power; the sensor will require 30 seconds to warm

up. Once the sensor receives the initial induction signal, the lamp

will turn on. If no other induction signal is received within the

time duration set, the lamp will turn off within 10 seconds ±3sec.

Turn the LUX knob anti-clockwise on the minimum (3). If the

ambient light is more than 3 LUX, the sensor is not able to

function. If the ambient light is less than 3 LUX (dark), the

sensor will work.

Note: when testing in daylight, please turn LUX knob to the

(SUN) position, otherwise the sensor lamp will not work! If the lamp

is more than 60W, the distance between lamp and sensor must be at

least 60cm apart.

Max: 15m

15m

360°

Max: 5m

Detection Distance: 30m (max)

Max: 15m