- ページ 13

アクセサリー Jalousie-Welt JupiterのPDF 操作およびメンテナンス、出荷、開梱および設置に関する説明書をオンラインで閲覧またはダウンロードできます。Jalousie-Welt Jupiter 20 ページ。 Terrace awning

If the awning were hanged in brackets, the hood Profile "Y" must be

raised enough to easily put up the awning in the brackets.

Awning put up in the brackets and insert supporting tubes in the

lane.

Awning in brackets secure with screws M8 using a wrench/ring

spanner Nr5.

Bring hood profile "Y" down.

Clamping plates

Screw on the hood with the enclosed screws.

3.8.4.2. Awning Installation without the Hood (Standard)

The awning hang in the

console and insert the support tubes in the

mounting hole.

Awning with brackets secure with

screws M8 using allen key Nr 5.

3.8.5. Pitch Angle Adjusting

Adjust the pitch angle the awning, so that the minimum height from the ground was not less than 220 cm.

„

Z" tighten.

Note

Awning is heavy and bulky. Make sure that the number of people is sufficient to mount

the awning to its size and weight.

Note

If a pitch angle the awning has less than 14° it is necessary to roll up device in case of

a rain as this could damage the awning construction.

CAUTION!

The Arms are under extreme tension. Risk of personal injury!

page: 13 / 20