- ページ 7

体重計 Gammex 163-DIGのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gammex 163-DIG 16 ページ。 Digital compression scale

Foam Compression Block

Features

Upon power-on, 163-DIG performs a startup sequence countdown. Keep the unit on a flat and stable

surface during initialization. At the end of initialization 163-DIG automatically zeroes.

Zero/Tare allows users to zero the scale for relative measurements, or measurements in different

orientations. Before any compression measurement is taken, the 163-DIG should be zeroed.

Note: After a tare force is removed, the Scale will read a negative value. Press Zero/Tare to re-zero

the 163-DIG.

Hold/Pause (

Zero/Tare.

Do not exceed the scale capacity – this can cause permanent damage and void warranty. Refer to

the Scale Specifications on page 6 for the scales capacity. If the scale is overloaded, the display

shows Err-0 and the load should be removed immediately.

The scale automatically powers off after 90-seconds of inactivity to preserve batteries. Activity

includes any button presses or change in force measurement.

Table 1: Accessories

⏸

) allows users to freeze the display on the Scale. Press it again to cancel, or use

Soft Case

Section 2. Features & Specifications