スピーカー Deco X55のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Deco X55 2 ページ。 Wi-fi 6 unit

Contact's guide to setting

up your new modem

Deco X55 Wi-Fi 6 Unit

Step 1: Download the TP-Link Deco app and create a

'TP-Link account'

This is where you set up and control the Deco modem from

your phone/tablet.

1. Download the 'TP-Link Deco' app onto your phone/tablet

by either:

a. Getting it from your app store OR

b. Scanning the QR code below.

Don't forget, you'll need an internet connection or have enough data

available to do this.

2. Open the app. Create an account by clicking on the small

'Sign Up' link at the bottom of the screen.

3. Finish setting up your account by clicking

the link you receive in your activation email,

then log into the app and verify to continue

the set up.

Step 2: Connect the TP-Link Deco modem to

your broadband

Open the app and follow these steps:

1. Plug the power cord provided in the box into your modem

and the other end into a power socket near your ONT. This is

the little white box on your wall that brings internet into your

house. It should power on automatically.

2. Using the other cord from the box (the ethernet cord),

connect your modem to your ONT also. Plug one end of the

ethernet cable into any port on the modem and the other end

into the activated port of the ONT (i.e. PORT1/LAN1 or GE1).

3. Open the app, click 'Let's begin' then select your Deco model.

You're looking for the 'X55'.

4. Click 'Next'.

5. Select 'I don't have a modem' from the small print. (Seems

odd as you do have a modem but please keep going.)

Please turn over