- ページ 6

冷凍庫 Frigidaire FFBC46F5LSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Frigidaire FFBC46F5LS 11 ページ。 Complete owner's guide (français)
Frigidaire FFBC46F5LS にも：工場部品カタログ (4 ページ), (スペイン語）オーナーズマニュアル (11 ページ), (フランス語）オーナーズマニュアル (11 ページ)

ページを印刷する

InStALLAtIOn

Step 7:Remove the bolt on the bottom of the door by screwdriver (see chart

Step 8:Remove the screw and the block ,then set them on the left side.(see

chart 3)

Step 9:Change the hinge axis

and fix the top hinge on the door,to make the door level,see chart 8.

Step 14:Check the sealing of the door,then refit the parts

Fig. 7

Step 10:Use knife to remove the parts ,see chart 5.

Placement of Wine Cooler

The wine cooler should be placed in dry and ventilated room. The location of

the wine cooler should not be irradiated by direct sunshine. The wine cooler

should be far away from heating sources, such as: cooking stove or heating

radiator. If the wine cooler has to be placed near heating source, please adopt

proper heating insulation board for insulation or keep the wine cooler at least

the following minimum distances away from the heating sources:

For electric stove: 3

For oil or coal stove: 30

Replacement of Door Hinge

The door hinges of this wine cooler can be interchanged between the left and

right sides.

Installation of Handle

1. Set the handle on the fixation shaft.

Chart 2

Stop

bracket

Bushing

Fig. 6

Chart 3

from the right hole to left hole(see chart 4)

Chart 4

- 8 -

Chart 8

- 10 -

ENERGY SAVING TIPS

•

Install the beverage cooler in

the coolest part of a dry and

ventilated room, out of direct

sunlight and away from heating

ducts or registers. Do not place

the beverage cooler next to heat-

producing appliances such as a

range, oven or dishwasher.

•

Level the beverage cooler so the door close tightly.

•

Do not over crowd the beverage cooler or block

cold air vents. Doing so causes the beverage cooler

to run longer and use more energy. Shelves should

not be lined with aluminum foil, wax paper or paper

toweling. Liners interfere with cold air circulation,

making the beverage cooler less efficient.

•

Wipe containers dry before placing them in the

beverage cooler. This cuts down on moisture build-up

inside the unit.

•

Organize the beverage cooler to reduce door

openings. Remove as many items as needed at one

time and close the door as soon as possible.