- ページ 4
アンプ Majorcom: AP 120のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Majorcom: AP 120 7 ページ。 Mic power amplifier
ページを印刷する1 MIC Input Connectors
These jacks are dedicated for MIC inputs 1 to 3. The input sensibility is 0.6 mV and impedance is 600 Ohms
balanced.
2 AUX Input Connectors
These inputs are used for connecting line-level sources such as CD, tuner or cassette deck.
3 0dB Output Connectors
The output modulation of the pre-amplifier come out of this terminal and allows connection of a more powerful
amplifier.
4 Speaker Terminals
These terminals are used to connect the speakers to the unit.
Select the 4 Ohms terminals or the high impedance terminals.
Do not select both the low and the high impedance together as this can cause an overload of both of them.
TENSION/IMPEDANCE
100V
70V
4
5 Fuse
Protection fuse. This must be replaced by a fuse of the same calibre in the event of failure.
6 Attenuation Level Control
When the other channel signals are inactive by MIC1, this control is used to set the level of attenuation.
7 AC Cable
This
permits
Services techniques et commerciaux : 56, chemin de la Flambère - 31300 TOULOUSE (France) • Tel. +33 (0)5 61 31 86 87 • Fax. +33 (0)5 61 31 87 73
Siège Social : RN 307 - 78810 FEUCHEROLLES • S.A. Capital 80.000 € • SIRET 334 579 869 000 28 • NAF 4652 Z • TVA Intracommunautaire FR 12334579869
MAJORCOM \ QUALITE \ ENREGISTREMENT DES DOCUMENTS \ ADMINISTRATIF \ ENR-12-PEM-V02
REAR PANEL CONTROLS
AP-30
333
163
10.9V
the
connection
www.majorcom.fr • [email protected]
User Manual
MODEL
AP-60
15.5V
of
an
AC230V
AP-120
21.9V
50Hz
power
adaptor.