- ページ 7

オーブン IKEA MATALSKAREのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA MATALSKARE 40 ページ。 Built-in electrical oven
IKEA MATALSKARE にも: 取扱説明書 (24 ページ), 取扱説明書 (20 ページ), マニュアル (8 ページ), マニュアル (36 ページ), 取扱説明書 (40 ページ), マニュアル (36 ページ), クイック・スタート・マニュアル (16 ページ), マニュアル (28 ページ), マニュアル (41 ページ), ユーザーマニュアル (12 ページ)

IKEA MATALSKARE マニュアル
ENGLISH

Control panel

1
2
3
1
Stop button
2
Power button
3
Memo button
4
Steam button
5
+ /- button
(use this button to set time or weight)

Daily use

Start protection / Key lock

This automatic safety function is activated
one minute after the oven has returned to
"stand by mode". (The oven is in "stand by"
when the 24-hour clock is displayed or if
the clock has not been set, when the display
is showing the two small dots between the
digits.
The door must be opened and closed
e.g. putting food into it, before the safety
lock is released. Else the display will show
"DOOR".

To pause or stop cooking

To pause cooking:
The cooking can be paused to check, turn
or stir the food by opening the door. The
setting will be maintained for 10 minutes.
To continue cooking:
Close the door and press the Start button
ONCE. The cooking is resumed from where
it was paused.
Pressing the Start button TWICE will increase
the time by 30 seconds.
If you don't want to continue cooking:
Remove the food, close the door and press
the Stop button
A beep will signal once a minute for 10
minutes when the cooking is finished.
4
5
6
7
6
Jet Defrost button
7
Start button
8
Door button
(use this button to open the door)
Press the Stop button or open the door to
cancel the signal.
NOTE: The oven will only hold the settings
for 60 seconds if the door is opened and
then closed after the cooking is finished.
Cooling down
When a function is finished, the oven carries
out a cooling procedure. This is normal.
After this procedure the oven switches off
automatically.

Kitchen timer

Use this function when you need a kitchen
timer to measure exact time for various
purposes such as cooking eggs or letting the
dough rise before baking etc.
2
1. Press the +/- buttons to set the desired
length of the timer.
2. Press the power button repeatedly to set
the power to 0 W.
3. Press the Start button.
An acoustic signal will be heard when the
timer has finished to count down.
1
3
9
8