- ページ 5
チャイルドシート Britax 217/2010のPDF 取扱説明書 取付・使用方法をオンラインで閲覧またはダウンロードできます。Britax 217/2010 18 ページ。
ページを印刷する
HOW TO INSTALL & USE
FOR USE WITH A LAP-SASH SEAT BELT AND
BOOSTER SEAT
There may be one of two types of Gated Slides available as
shown below provided with this harness. Only use Gated Slides
recommended for this Harness.
If curved Gated Slide, then the belt route through this can only go
one way as shown.
Before using the Defenda™ Harness with a Lap-Sash Seat Belt,
you need to convert the seat belt to a Lap Seat Belt by using the
Gated Slide provided.
IMPORTANT: Face the hollow side of the Gated Slide towards the
child. Do not use Gated Slide for any other purpose.
Curved
Always ensure the Hollow side
is towards child
A. Hold the lap and sash straps
together and fold as shown
below. Slide the inner strap into
the Gated Slide followed by the
outer strap.
8
Flat
Outer
Inner
Strap
Strap
Faces
towards
Child
A
HOW TO INSTALL & USE
B. The two straps should slide
freely in the Gated Slide slot.
C. Repeat previous step A for the
other slot in the Gated Slide.
D. Feed the straps through
the Gated Slide to remove
any slack. This has now
converted the lap-sash seat
belt so it will act like a lap
only seat belt.
Loop on top
Strap
portion
Hollow side
Lap portion
towards the child
TO ENSURE CORRECT CONVERSION OF LAP-SASH SEAT BELT
TO LAP SEAT BELT FOLLOW THESE STEPS.
IMPORTANT:
The Gated Slide must be removed from the seat belt if the
booster seat and child harness are no longer used in the car so
that other users can use the seat belt as a lap sash seat belt.
A seat belt extender should not be used if the seat belt is not
long enough to secure the child. If a seat belt extender is used
then the buckle must not be in contact with the child.
B
C
Hollow side
towards child.
D
9