- ページ 9

チャイルドシート Britax 217/2010のPDF 取扱説明書取付・使用方法をオンラインで閲覧またはダウンロードできます。Britax 217/2010 18 ページ。

HOW TO INSTALL & USE

TO REMOVE CHILD FROM HARNESS

AND SEAT

Disengage seat belt tongue and

buckle, remove the lap portion

of seat belt from the Lap Belt

Positioning Device (where

provided) and remove Child

Harness and seatbelt from child.

Lift child harness strap

over child's head.

TO LARGE FOR A BOOSTER SEAT

Once the child is too large for the booster seat, the child's

shoulder's reach the Upper Shoulder Height Marker, the Child

Harness can then be used with a lap only seat belt on the car's

seat. A Child Harness is a significant safety device for children in

a lap only seat belt. Refer to the following pages.

Upper Shoulder

Height Marker

HOW TO INSTALL & USE

USING THE HARNESS WITH THE CAR'S SEAT

AND SEATBELT

This mode is used after the child has finished using a Booster

Seat or Convertible Booster Seat because their shoulders were

in line with the Upper Shoulder Height Marker. If you have not

already done so, check your car owner handbook for the location

of the car's child restraint anchor fitting. If there is no anchor

fitting then read pages 25-28.

When installing the Defenda™ Harness into the vehicle connect

the upper anchorage strap to the anchor fitting on the parcel shelf

or behind the seat.

Use the Extension Strap (an accessory) for all other instances

requiring a longer strap to attach the harness to anchor points in

the vehicle floor or roof (See page 25).