ページを印刷する
ENGLISH
Problem
There is too much condensed
water on the rear wall of the
refrigerator.
Water flows inside the
refrigerator.
Water flows on the floor.
The doors does not close
completely.
Error code explanation
•
6° indicator flashing: Failure of ambient
temperature sensor
•
3° indicator flashing: Defrosting sensor
failure of the refrigerator compartment
•
2° indicator flashing: Temperature sensor
failure of the refrigerator
Possible Cause
Door was opened too frequently.
Door was not closed completely.
Stored food was not wrapped.
The drain hole at the back of the
appliance is clogged.
Food products prevent water from
flowing into the water collector.
The door is not closed well.
The drip pan cracks.
The defrost water drain is clogged.
The shelves are out of position.
The door gaskets are dirty.
The appliance is not level.
Open the door only when
necessary.
Make sure the door is closed
completely.
Wrap food in suitable packaging
before storing it in the appliance.
Clean the drain hole with a piece
of wire.
Make sure that food products do
not touch the rear plate.
Refer to "Closing the door", or
refer to the troubleshooting item
below ("The door does not close
completely").
The IKEA after sales customer
service center will assist you on the
phone at the time of service call
request.Please refer to
www.IKEA.com/au
and select your local store for local
store phone numbers and opening
times.
Clean the drain hole with a piece
of wire.
Make sure the shelves are in
correct position. Refer to "Movable
shelves".
Clean the door gaskets.
Make sure the appliances
is installed in level. Refer to
"Levelling feet" or the separate
Assembly Instructions.
If your appliance still is not working
properly after making the above checks,
the IKEA after sales customer service
center will assist you on the phone at the
time of service call request. Please refer to
www.IKEA.com/au
and select your local store for local store
phone numbers and opening times.
16
Solution